CT Series
| Product Series | CTC | |||||
| Galvanometer parameters |
Light spot | 8 | 10 | 14 | 20 | 30 |
| Incident aperture | 8mm | 10mm | 14mm | 20mm | 30mm | |
| Maximum scanning angle | ±0.35Rad | ±0.35Rad | ±0.35Rad | ±0.35Rad | ±0.35Rad | |
| Small step response time | ≤0.2ms | ≤0.25ms | ≤0.45ms | ≤0.75ms | ≤1.0ms | |
| Marking speed | 4m/s | 3.5m/s | 2.5m/s | 1.2m/s | 0.8m/s | |
| Positioning speed | 18m/s | 17m/s | 12m/s | 8m/s | 5m/s | |
| Gain drift | ≤50PPM/℃ | ≤50PPM/℃ | ≤50PPM/℃ | ≤50PPM/℃ | ≤50PPM/℃ | |
| Zero drift | ≤30μRad/℃ | ≤30μRad/℃ | ≤30μRad/℃ | ≤30μRad/℃ | ≤30μRad/℃ | |
| 8 hours working drift | ≤0.2mRad | ≤0.2mRad | ≤0.2mRad | ≤0.2mRad | ≤0.2mRad | |
| Average working current | 5A | 5A | 5A | 5A | 5A | |
| Peak current | 10A | 10A | 10A | 10A | 10A | |
| Repeat accuracy | 12μRad | 12μRad | 12μRad | 12μRad | 12μRad | |
| Linearity | ＞99.5% | ＞99.5% | ＞99.5% | ＞99.5% | ＞99.5% | |
| weight | （1.7±5%）KG | （1.8±5%）KG | （3.3±5%）KG | （6.0±5%）KG | （8.0±5%）KG | |
| Servo driver board parameters | Power supply | ±15V/5A DC | ±15V/5A DC | ±15V/5A DC | ±15V/5A DC | ±15V/5A DC |
| Position signal input impedance | \ | |||||
| Position signal input scale factor | 0.5V/° | 0.5V/° | 0.5V/° | 0.5V/° | 0.5V/° | |
| Position signal output scale factor | 0.5V/° | 0.5V/° | 0.5V/° | 0.5V/° | 0.5V/° | |
| Position resolution | 16bit | 16bit | 16bit | 16bit | 16bit | |
| Input signal | Digital signal | XY2-100 | XY2-100 | XY2-100 | XY2-100 | XY2-100 |
| Lens reflection wavelength | 10600、1064、532，355 | 10600、1064、532，355 | 10600、1064、532，355 | 10600、1064、532，355 | 10600、1064、532，355 | |
| Operating temperature | 25±10℃ | 25±10℃ | 25±10℃ | 25±10℃ | 25±10℃ | |
| Water cooling | Water quality requirements | distilled water | distilled water | distilled water | distilled water | distilled water |
| temperature setting | 25±3℃ | 25±3℃ | 25±3℃ | 25±3℃ | 25±3℃ | |
| Maximum water pressure | ＜3bar | ＜3bar | ＜3bar | ＜3bar | ＜3bar | |
| Water flow | ＜6L/min | ＜6L/min | ＜6L/min | ＜6L/min | ＜6L/min | |
